On this page you can manage your alarm signals .
User: Extract only alarms that affect a specific user.
User group: Extract only alarms that affect a specific user group.
Plant: Allows you to extract only alarms that affect a specific plant.
Type: allows to extract only the alarms sent via a specific medium (e-mail, sms, voice, notification).
Once you press the “query” button, the alarm signals will be displayed as follows:
New analog/ New digital/ New parameters:
The only differences between the alarm signals for the 3 types of signals are the conditions of activation of the alarm:
- Condition: for the analog signal, you can choose the activation condition (upper threshold, lower threshold, deviation).
- Value: for parameter signals, you can choose which parameter to set the alarm signal on.
- For digital signals you can choose whether to activate the alarm on the status off, on or on the change of state.
Tags and message text: Within this section you can combine various tags with text to build a detailed and easy-to-understand alarm message.
Change: you can change the details of each alarm signal.
Signals: you can select signals to add to the alarm signal.
Thresholds: you can change the threshold and signal deviation within the selected alarm signal.
Recipients: You can choose the recipients of notifications for the selected alarm signal.
Calendars: you can select a calendar of availability at the selected alarm signal.
Test alarm: sends test notifications to the recipients of the alarm signal.
Configuration of the alarm from the plant
After selecting a plant, by clicking on the bell in the upper right corner you can configure the alarm signal directly from the page of a plant.
Once pressed the bell you can proceed to create the alarm signal exactly as explained above, or choose to create a new alarm signal from an existing one:
Was this helpful?
0 / 0